Indicator Leds; Input Voltage - Ampro neo DMX TRIGGER Manual De Usuario

2. MENU INSTRUCTIONS
Attention: when finish upgrade, users have to-
click restore factory setting.
Buttons
MENU, UP, DOWN, ENTER, MENU can be used as
BACK UP

Indicator LEDs

GREEN: always on means playing files; flicker means
recording files.
RED: flicker means that SD card is read/write data.
BLUE: always on means external trigger is on; flicker
means inputting DMX signals.

Input voltage

Support 8 GTF card, support 3 PIN XLR DMX, exter-
nal trigger connecting cables.
How to record Shows
Firstly, enter into Recorder menu, change the name
you wanted, choose record mode, input DMX signal,
if there is on front of the file name, that means this
name is already existing, if continuously record, will
cover the old data. Click Start Record to start, and
Stop Record to stop.
Record modes
• Manual: manual start, manual stop.
• Semi_Auto: auto start, manual stop.
• Auto: non-zero to start, zero to stop.
How to play recorded Shows
Firstly, enter into Player menu,choose the file you
want to play, choose the playing mode: One Play/
Loop Play. Click Start Play to start and Stop Play
to stop.
Playing modes
• One Play: play once.
• Loop Play: play by loops.
How to delete Shows in TF-Car
Press Delete File to activate, and Press Menu
tobackup last menu.
P. 3
English version - Neo DMX Trigger