Troubleshooting - Clarke American Sanders OBS-18DC Manual Del Operador

ENGLISH EN

Troubleshooting

Problem
Motor will not start.
Motor fails to start / runs
sluggish.
Fuse / Circuit Breaker repeatedly
trips.
-8- FORM NO. 70403B
Cause
No power.
Interlock not depressed.
Defective switch/ Bad connection
Low voltage from excessive length
or undersized extension cord.
Defective start capacitor.
Defective start switch.
Defective start/run capacitor
Defective motor low voltage
Low voltage.
Bad connection.
Defective motor.
®
American Sanders Operator's Manual (EN) - OBS-18/18DC HDTR
Clarke
Action
Check power supply and connection
Depress Interlock before activating control
lever.
Contact an authorized Clarke
American Sanders Dealer.
Use a 14 Ga extension cord, not to exceed
50' length.
Contact an authorized Clarke
American Sanders Dealer.
Contact an authorized Clarke
American Sanders Dealer.
Contact an authorized Clarke
American Sanders Dealer.
Contact an authorized Clarke
American Sanders Dealer.
Eliminate extension cord.
Locate power source closer to
work site. Have voltage checked by
a qualifi ed electrician.
Contact an authorized Clarke
American Sanders Dealer.
Contact an authorized Clarke
American Sanders Dealer.