Product Specifications; Delivery Form; Technical Data; Acceptable Operating Conditions - Ivoclar Vivadent VP4 Instrucciones De Uso

9. Product Specifications
9.1

Delivery form

Vacuum pump
Operating Instructions
Warranty Card
9.2

Technical data

Power supply:
Tolerated voltage fluctuations:
Power consumption:
Suction strength:
Final vacuum
(measured with a 4-liter test container):
Dimensions: 320 x 110 x 212 mm (length, width, height)
Weight:
Types of fuses:
Safety information :
The VP 4 Vacuum Pump complies with the following
guidelines:
– EN 61010, Part 1, iEC 61010-1, UL 61010-1,
CSA 61010-1
– EMV tested
9.3

Acceptable operating conditions

– Ambient temperature range of:
+5 °C to +40 °C (+41 °F to +104 °F)
– Acceptable height:
The pump is tested for use at altitudes of up to
2000 m above sea level. Ambient pressure of 500 mbar to
– Pollution degree: 2
Overvoltage categorie: II
9.4 Acceptable transportation conditions
– Ambient temperature range of:
– Maximum relative humidity:
12
230 V / 50–60 Hz / 0.45 A
200 V / 50–60 Hz / 0.65 A
115 V / 50–60 Hz / 1.1 A
approx. 30 mbar
230 V: 1.0 AT 250 V
200 V: 1.6 AT 250 V
115 V: 2.5 AT 250 V
-10 °C to +55 °C (-4 °F to +131 °F)
+/– 10%
80 W
19 l / min.
6.7 kg
1060 mbar.
80%
This apparatus has been developed for use in dentistry. Setup and
operation should be carried out strictly according to the Operating
Instructions. Liability cannot be accepted for damages resulting from
misuse or failure to observe the Instructions. The user is solely
responsible for testing the apparatus for its suitability for any purpose
not explicitly stated in the Instructions. Descriptions and data
constitute no warranty of attributes.