Manta IRN210 Manual De Usuario página 10

The pilot light (9) indicates that the steam iron gets hot. After the pilot light is
off , the selected temperature has been reached and you can start ironing.
Functions
Water spray
Dry / Steam
Burst of steam
Keeping/Cleaning/Care
Switch the steam iron off (Put control-position to minimum temperature; see
mark on water tank) and unplug. Put the steam iron upright and let it
completely cool down, empty the water tank.
Remove residues from steam sole with a vinegar-water solution. Rub the
cabinet with a moister cloth and finally rub it dry.
Automatic electricity interruption for security
In case the installed thermostat gets out of order the power supply will stop
automatically to avoid the steam iron to overheat. In this case the steam
iron has to be repaired by the service point.
User's Manual
To moist the steam laundry press the button "water
spray" (2)
You can fix the steam intensity directly by turning the
steam function "0"=steam dry
outflow
To reach a burst of steam, press the button "short burst
of steam" (2).
Attention: Only, use the steam push button when the
steam iron has reached the steam or
maximum temperature.
Do not press this button more than 3 times at once.
=maximum steam
10
E N