NORAUTO 2168677 Manual De Instrucciones página 51

• Not for use by children or people with reduced mental capacity.
• Do not use under the influence of drugs or alcohol.
• Ensure children and other bystanders are kept at a safe distance when using equipment.
INSPECTION
• Inspect the equipment carefully before each use. Ensure the equipment is not damaged, excessively
worn, or missing parts.
• Do not use the equipment unless it is properly lubricated.
• Using equipment that is not in good clean working condition or properly lubricated may cause serious
injury.
• Inspect the work area before each use. Make sure it is free and clear of any potential hazards.
DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL.
To maintain the equipment and user safety, the responsibility of the owner is to read and follow these
instructions.
• Inspect the equipment for proper operation and function.
• Keep instructions readily available for equipment operators.
• Make certain all equipment operators are properly trained; understand how to safely and correctly operate
the unit.
• Allow unit operation only with all parts in place and operating properly.
• Use only genuine replacement parts.
• Service and maintain the unit only with authorized or approved replacement parts; negligence will make
the equipment unsafe for use and void the warranty.
• Carefully inspect the unit on a regular basis and perform all maintenance as required.
• Store these instructions in the handle of your equipment.
• Keep all decals on the unit clean and visible.
SAFETY MARKINGS
WARNING!
1. Study, understand, and follow all instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces.
4. Lock mounting plate rotating mechanism before applying a load.
5. Rotate the engine using the handle or device provided.
6. Assure load is centered and secured to mounting attachments.
7. 8Off-center loads may make the load and handle rotate in either direction when the rotational locking
device is released.
8. Release rotational locking devices slowly and carefully.
9. No alterations shall be made to this product.
10. Only attachments and/or adapters supplied by the manufacturer shall be used.
11. Never work directly under a supported load.
12. Do not use this crane for any use other than the manufacturer specified usage.
13. Failure to heed these markings may result in personal injury and/or property damage.
51