Replacement
of the interior lights
Warning:
To avoid an electric shock, unplug the unit when replacing
the lamp bulb.
/
,_
,_
Bulb
Lamp socket
................. _
Lamp cover
Screw-----_
The lamp base is E26; the rated power of the bulb is 15W.
Use a bulb of the same rating
when replacing.
When replacing
a light bulb, remove
the screw at the back of the lamp,
then, to release the cover, push it firmly backward
and then carefully
pull down. Replace
bulb with the same size and type of bulb and fix the cover back into place.
Protecting
waterproof
seals
WARNING!
Do not open the electrical
control
box on the upper rear panel of this
appliance
since this will break the waterproof
seal around the control box. When this box
is serviced
by a professional,
a waterproof
sealant
must be applied
to the box after
maintenance.
Similarly,
do not attempt to open the digital control panels on the doors of the unit. This will
damage
the waterproof
seal around the panels.
9