Product Specifications; Before Use - Bosch GCO 2000 Professional Instrucciones De Servicio

Operating instructions

Product Specifications

Cut_Off and Miter Saw
Order number
Voltage
Rated input power
Frequency
No load speed
Tool spindle With adapter
Weight approx.
Cutting disk-Ø
Protection class
For maximum work piece dimensions, see the Working Instructions Section
Product Elements
The numbering of the product elements refers
to the illustration on the graphics page.
1 Handle
2 On/Off switch
3 Tool arm
4 Depth stop
5 Lock nut of the depth stop
6 Transport safety-lock
7 Angle stop bolts
8 Box-end wrench
9 Base plate
10 Spindle handle
11 Quick release
12 Clamping spindle
13 Angle stop
14 Retracting blade guard
15 Spindle lock
16 Transport handle
17 Wing bolt for cover lid
18 Cover lid
19 Lever
20 Cutting disc*
21 Tool spindle
22 Clamping flange
23 Washer
24 Hexagon socket screw
25 Lock-on button
*Not all the accessories illustrated or described are
included in standard delivery.
Robert Bosch Ltda.
GCO 2000
PROFESSIONAL
0 601 B17...
[V] 127
[W] 1.900
[Hz] 50/60
[min ] 3,500
-1
[mm] 25,4
[kg] 19,4
[inch] 14
/ II
Operating instructions

Before Use

Avoid unintentional starting of the machine.
During assembly and for all work on the
machine, the power plug must not be con-
nected to the mains supply.
To ensure safe handling, the feet of the base
plate 9 must be placed on a suitable platform
(e.g. workbench, even floor, etc.).
Transport Safety
Before all work on the machine, pull the
power plug.
The transport safety 6 makes possible easy
handling of the machine when transporting to
the various working locations.
Securing the Machine (Transport Position)
Swing the tool arm 3 with the handle 1 down-
ward to the stop. Press in the transport safety
6 and release the handle.
Releasing the Machine (Working Position)
Press the tool arm 3 with the handle 1 of the
machine somewhat downward to relieve the load
on the transport safety. Pull the transport safety
6 outward and guide the tool arm slowly upward.
Take care while working that the transport
safety is not pressed in, otherwise the tool arm
cannot be swung down to the desired depth.
en | 23
0 601 B17...
220
2.000
50/60
3.500
25,4
19,4
14
/ II
F 000 622 257 | 03.2008