Unpacking Inspection; Safety Information; Rules For Safe Operation - Egatronic 51248 Manual De Instrucciones

Digital Clamp Multimeter Model COD. 51248 (hereafter referred to as "the Meter") is 3 3/4 digits
with steady operations, fashionable structure and highly reliable measuring instrument. The Meter
uses large scale of integrated circuit with double integrated A/D converter as its core and has full
range overload protection.
The Meter can measure AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Resistance,
Diodes, Continuity and etc.
Open the package case and take out the Meter. Check the following items carefully to see any
missing or damaged part:
Item
1
2
3
4
In the event you find any missing or damage, please contact your dealer immediately.
This Meter complies with the standards IEC61010: in pollution degree 2, overvoltage category
(CAT II 600V, CAT III 300V) and double insulation.
CAT II: Local level, appliance, PORTABLE EQUIPMENT etc., with smaller transient overvoltages
than CAT III.
CAT III: Distribution level, fixed installation, with smaller transient overvoltages than CAT IV.
Use the Meter only as specified in this operating manual, otherwise the protection provided by
the Meter may be impaired.
In this manual, a Warning identifies conditions and actions that pose hazards to the user, or may
damage the Meter or the equipment under test.
A Note identifies the information that user should pay attention to.
International electrical symbols used on the Meter and in this Operating Manual are explained
on page 20.
To avoid possible electric shock or personal injury, and to avoid possible damage
to the Meter or to the equipment under test, adhere to the following rules:
Warning!
Before using the Meter inspect the case. Do not use the Meter if it is damaged or the case (or part
of the case) is removed. Look for cracks or missing plastic. Pay attention to the insulation around
the connectors.
- Inspect the test leads for damaged insulation or exposed metal. Check the test leads for
continuity. Replace damaged test leads with identical model number or electrical specifications
before using the Meter.

UNPACKING INSPECTION

Description
Operating Manual
Test Lead
Tool box
9V Battery (NEDA1604A or 6LF22)

SAFETY INFORMATION

RULES FOR SAFE OPERATION

Qty
1 piece
1 pair
1 piece
1 piece
19