Kenwood KDC-BT652U Manual De Instrucciones página 23

Item
PAIRING
PHONE SELECT Selects a cell-phone connection. (For details, see page 22.)
AUDIO SELECT
Selects a Bluetooth audio player connection. (For details, see page 22.)
DEVICE DELETE Cancel registration of the Bluetooth device.
1. Turn the volume knob to select the Bluetooth device, then press to confirm.
2. Turn the volume knob to select "YES", then press to confirm. "DELETE" is displayed.
TRANSFER PB
(For details, see page 20.)
DETAILED SET
PIN CODE EDIT
Specify the PIN code required when registering this unit using the Bluetooth device. By default, "0000" is
specified.
1. Turn the volume knob to select the number.
■ ■
■ ■
2. Press the volume knob to register a PIN code. "COMPLETED" is displayed.
AUTO ANSWER OFF: Does not answer the phone call automatically. ; 0: Automatically answers the phone call at once. ;
1 – 8 * –99: Automatically answers the phone call after lapse of 1 – 99 seconds.
RECONNECT ON *: Automatically reconnects the selected Bluetooth device when radio wave becomes strong enough,
even after it is disconnected. ; OFF: Cancels.
When this function is turned ON, the Bluetooth device is reconnected if it has been disconnected by
■ ■
selecting [PHONE SELECT]/ [AUDIO SELECT].
BT HF/AUDIO FRONT *: Outputs audio from the front-left and front-right speakers. ;
ALL: Outputs audio from the all speakers.
CALL BEEP ON *: Sets whether to output a beep from the speaker when a call comes in. ; OFF: Cancels.
BT F/W UPDATE Display the firmware version and update the firmware.
MIC GAIN 1 — 8 *(KDC-BT652U) — 12 *(KDC-X696) — 15: Adjust the sensitivity of the microphone for telephone call
or adjusts the voice of the caller.
To move to the next digit, press ¢.
To delete the last digit, press 4.
Selectable setting (Preset: *)
23
English