Restore Settings - Coby CVM510 Manual De Instrucciones

Restore Settings

To remove all pairings and restore the speakerphone to its
default settings, please follow the steps below.
1. Ensure the speakerphone is in standby mode.
2. Press and hold both the V+ and V– buttons for 10
seconds until the blue and red LED flash 5 times. The
original settings are now restored.
If the speakerphone has been paired with a mo-
bile phone, it will enter pairing mode automati-
cally after being restored to its default settings.
If the speakerphone has not been connected to a
mobile phone, it will remain in standby mode.
Page 14 Coby Electronics Corporation