Pairing Your Speakerphone; Standard Pairing - Coby CVM510 Manual De Instrucciones

Getting Started
power off:

When in standby mode, press and hold the MFB key
for 4 seconds until you hear a short beep. The red LED
will flash 5 times, and the speakerphone will turn off.

Pairing your speakerphone

Standard Pairing

Prior to using the speakerphone for the first time, you
must pair it with a Bluetooth-enabled mobile phone. The
steps below describe pairing instructions for a typical
Bluetooth-enabled cellular phone. If these instructions
do not work, please refer to the documentation provided
with your phone.
1. Place the speakerphone and phone no more than 1
meter apart.
2. Ensure the speakerphone is turned OFF.
3. Press and hold the "MFB" button for 6 seconds until
the LED indicator flashes red and blue alternately.
4. Activate the Bluetooth function on your mobile
phone and search for an accessible Bluetooth device.
For more information, refer to your phone's user
guide.
5. Select "BT-PIHF13M" from the list.
6. Enter the pre-programmed code "0000" and press
"OK" to pair the speakerphone and the phone. When
pairing is completed, the blue/red indicator flash will
be replaced by a blue flash every 3 seconds (indicat-
ing standby mode).
www.cobyusa.com www.cobyusa.com Page 7 Page 7