TF TOP FLITE JOGGSTER adventure Instrucciones De Uso página 10

(Fig. VIII) The footrest (17) can be folded upwards. To do so, swivel it
upwards and secure it underneath with the metal bar (18). You can
shift the footboard (19) into three different positions by folding it.
(Fig. IX) Basic adapters (20) are pulled on the bars, so that they lock
hearable into the pins.
(Fig. X) To fasten the bumper bar (21), open the fabric cloth on the
cover and pull the fastening over the frame tube. Secure it by closing
the clamp lever (22). By pressing the red buttons on the left and right,
you can swivel it into various positions.
(Fig. XI) You can set the height of the push bar by pressing the two
adjustment joints (23).
(Fig. XII) The handbrake (24) is a walking and parking brake at the
same time. To activate the parking brake, you must pull the brake
lever (24) fully tight and completely close the red parking lever (25),
so that the brake lever (24) remains tightened to the maximum and
the brake is permanently blocked. To release the brake, you must
pull the brake lever (24) and unlock the parking lever (25) again. If
the braking effect starts to weaken, you can carry out a fine
adjustment. To do so, turn the adjusting screw (26) on the brake grip
anti-clockwise and check the braking effect again.
(Fig. XIII) To fold up the Joggster Adventure, fold the footboard (19)
up, release the two locks (4) over the folding joint and the double
lock (3) and swivel the push bar (2) towards the front. Then pull the
basket (1) upwards with a jerk. To do so, use the carrying strap (27)
on the basket. You can then lift up the pushchair by the belt (27); it
will then fold together.
(Fig. XIV) Close the transport lock (28) on the frame to ensure that
the Joggster Adventure does not accidentally open up again.
(Fig. XV) If you are using the Joggster Adventure in cross-country
terrain, please fasten the enclosed retention strap on the rear axle.
Then pull the side with the elastic band over your wrist.