Digital Coding - Hartig+Helling babyruf MBF 8020 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
GB
1.
SCOPE OF SUPPLY
1 x transmitter with integrated charging device, 1 x receiver, 1x charging station for the receiver,
2 x power supply units, 2 x special pre-charged battery packages, 1 x operating instructions
2.
OPER ATING COMPONENTS
Transmitter
1.
Aerial
2. On/Off switch
3.
Transmission indicator
4.
Sensitivity
5.
Operating indication
6.
Microphone
7.
Power socket
3.
IMPORTANT NOTES
Read the operating instructions before using the equipment!
Avoid exerting large mechanical loads on the product.
Do not expose the product to high temperatures, direct sunlight, strong vibrations or mois-
ture.
Do not leave the packaging material lying around. It could become a dangerous toy for child-
ren.
Do not place the transmitter into a baby's cot or playpen.
Always place the equipment out of reach of small children.
Safe operation is no longer guaranteed if the equipment has visible damage or is no longer
functioning correctly.
Maintenance, adaptation and repair work may only be carried out by an authorised specialist.
If you have any questions that are not answered in the operating instructions please contact
our technical service department on:
(
4.
BEFORE INITIAL OPER ATION
4.1

DIGITAL CODING

To change the channel and the digital code, please open the battery compartment cover of the
transmitter and the receiver. You will see the fishplates of the battery cover from below; pull until
you hear that they are out of the holders (see Illustration A-B). You can now change the channel
and the digital code (see Illustration C).
Important! Both devices must have the same switch settings for the transmitter and recei-
ver to communicate.
14
Receiver
8. Vibrating alarm on/off
9. On/Off switch
10. Reception/range
indicator
11. Volume
12. Operating indication
13. Loudspeaker
14. Power socket
0180 5 007514
0,14 Euro/min. from a German landline.
Backside
15. Digital code selector
(white DIP switch)
16. Channel selector
(yellow DIP switch)
17. Battery compartment
max. 42 ct/min.)

Publicidad

Tabla de contenido
loading

Tabla de contenido