Universal 8:1 Remote Control - König Electronic IR-URC30 Manual De Uso

4. Scroll ▲ or ▼ key to LEARN KEY in the LCD menu and then press the OK
key.
5. Select the (target) key you want to learn (e.g. Power). The LCD display
SELECT KEY.
6. Point the transmitter of the original remote control remotes face to the
receiver window of IR-URC30 by approximately 30mm apart.
7. Press and hold the original remote key (e.g. Power) until the LCD display
shows SUCCESS for 1 second. If LCD display shows FAILED, please repeat
steps 4-6.
8. Repeat steps 4-6 to learn more keys.
Press a target key
(e.g. Power)
Learning eye
Original Remote Control
Delete the Learnt Key
If you like to delete a learned command, you can follow the steps as below:
1. Press the device key (e.g. TV) where the command you like to delete from.
2. Press and hold the SET key for more than 3 seconds, then release it.
3. Scroll ▲ or ▼ key to LEARNING in the LCD menu, then press the OK key
and the LCD display shows LEARN KEY.
4. Scroll ▲ or ▼ key to DELETE KEY in the LCD menu and then press the OK
key.
5. Press the key on IR-URC30 that you want to delete, the LCD shows SURE
DELET and then press the OK key to confirm, the LCD will show SUCCESS.
6. Repeat Step 4 to delete next key you want.
7. Press a device key (e.g. TV) to quit the delete operation when all desired
remote commands are deleted.
SET 3S
Press a source key
on original remote
5
to learn in next key
Universal Remote Control