Cleaning And Care; Intended Use - OK. OHT 200 Manual De Instrucciones

EN
NOTE
• Cut hair only when it is dry.
• Switch the appliance on for a short time before
cutting hair.
• Cut slowly, using short strokes.
• Always trim little hair at a time.
• Comb hair frequently to remove trimmed hair and
check for uneven strands.
• To extend battery life, fully charge and then fully
discharge the battery approximately twice a year.
• Switch the appliance off after use.

CLEANING AND CARE

• Switch the appliance off before cleaning. Make sure
the adapter is disconnected.
• After each use, clean the blade with brush provided.
• Remove guide comb and clean under running water;
then wipe dry thoroughly.
• After oiling, wipe off any excess oil.
• Wipe the appliance with a damp cloth.
DISPOSAL
Do not dispose of this appliance as municipal
waste. Return it to a designated collection point for
the recycling of electrical and electronical
equipment. Contact your retailer or local authorities for
more information.

INTENDED USE

This appliance is intended for cutting scalp hair. Only use
according to these instructions. Improper use is
dangerous and will void any warranty claim. Important
safety instructions can be found in the separate
document.
18