Setting Up The Coffee Maker - Dometic Waeco PerfectCoffee MC052 Instrucciones De Montaje Y De Uso

PerfectCoffee MC052, MC054
7

Setting up the coffee maker

!
WARNING!
When selecting the location for installing the appliance, ensure
that passengers cannot be injured under any circumstances.
When installing the appliance, make sure the airbag function is
not impaired.
Do not attach the appliance in an area where passengers could
knock their heads against it. Make sure there is sufficient space
for the drill head to emerge when drilling.
A
NOTICE!
Only install the appliance on surfaces which are heat-resistant
and damp-proof.
Setting up the coffee maker
You can install the coffee maker on a wall (fig. 3, page 4) or a work surface
(fig. 4, page 4).
➤ Install the mounting bracket using the four crews supplied
– to a suitable wall or
– to a work surface.
➤ Push the coffee maker onto the mounting bracket.
The coffee maker must lock into place on the mounting bracket.
Connecting the coffee maker
➤ Check that the voltage specification on the type plate is the same as that
of the power supply.
➤ Connect the DC plug to a DC socket.
I
NOTE
You can also connect the coffee maker directly to the battery.
Observe the following in the process:
 The connection must be fitted with a fuse of its own of at least
20 A.
 The connection cable may not exceed a length of 5 m for the
MC052 (12 V) or 11 m for the MC054 (24 V).
 The cross section must be at least 4 mm².
EN
Setting up the coffee maker
21