Handling Of Batteries; Inserting The Batteries; Overview Of The Components; Technical Data - Profi Care PC-PW 3006 FA Manual De Instrucciones

Handling of Batteries

Do not charge!
Do not disassemble!
Insert correctly!
Danger of explosion! Do not expose batteries
to intense heat, such as sunlight, fire or similar.
Do not short circuit!

Inserting the Batteries

(Batteries not included)
1. Open the battery compartment on the underside.
2. Insert 4 batteries of type AAA / R03. Please ensure that
the polarity is correct (see the loor of the battery compart-
ment)!
3. Close the battery compartment again.
4. If the message " " appears on the display, replace the
batteries.

Overview of the Components

1 button
2 SET button
3 button
4 Display
5 Contact surfaces
Underside (not shown)
Battery compartment
Button "kg / lb / st" (select the unit of weight)
Display Indications Meaning
P0 - P9 User memory space
Male
Female
Age
Age
cm (ft)
Body height
kg (lb / st) Body weight
Body fat display
Muscle mass display
32
PC-PW3006 FA_IM
Display Indications Meaning
Body water display
Bone weight display
Percentage - body fat / body water /
%
muscle mass / Bone weight
Rating:
underweight - normal weight -
overweight - obese
bmi Body Mass Index
Basal metabolic rate of the daily
KCAL
energy requirement in kilocalories
(BMR)

Technical Data

Model:............................................................. PC-PW 3006 FA
Power supply:...................4 Batteries 1.5 V Type "AAA" / "R03"
Net weight of appliance:................................... approx. 1.55 kg
Memory capacity: .................................................................. 10
Mass alignment: ................... from 75 to 225 cm (2'5" - 7'4 ½" ft)
Age: ............................................................from 10 to 85 years
Minimum weight: .......................... from 5.0 kg (11.0 lb / 0: 08 st)
Maximum weight: ........................... 180 kg (396.8 lb / 28: 3½ st)
Weight measurement unit: ........ 100 g (0.2 lb / ¼ st) increments
Body fat measurement unit: ............................................. 0.1 %
Body fluid graduation: ...................................................... 0.1 %
Recommended operating environment:
Temperature: ...............................0 °C - 40 °C / 32 °F - 104°F
Relative air humidity: ..................................................< 85 %
Body fat measuring range: .................................. 4.0 % - 50.0 %
Body water measuring range: ........................... 35.0 % - 85.0 %
Muscle mass measuring range: .......................... 1.0 % - 50.0 %
Bone weight measuring range: ........................... 1.0 % - 15.0 %
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.

Information about the Analysis Scale

WARNING:
Do not use the scales if you use a pacemaker or another
medical implant with electronic components. The function
of the implant may be impaired by the measurement.
The main principle of this appliance is based on the meas-
urement of the electric impedance within the human body. In
order to determine the actual body data, the appliance leads
a weak, unnoticeable electric signal through your body.
18.09.17