NuVinci Nfinity Serie Manual Del Propietário página 17

Installing Shifter Cables
4. Install one shift cable, allowing the shifter
housing (E) to guide the cable around the
internals until it comes out the other side.
Guide the cable through the closest barrel
adjuster (F).
5. Pull the cable through the barrel adjuster
until the cable anchor seats fully into the
grip pulley (G).
6. Rotate the grip to position the next cable
for installation and repeat step 4. and
step 5.
7. Reinstall the bottom cover and screw (A).
Torque to 0.2-0.3 Nm (2-3 in-lbs).
TECHNICAL OWNER MANUAL
E
F
G
A
EN
17