Storage Instructions; Transporting Unit; Sodcutter - CGC RYAN Serie Manual Del Operador

CUTTING SOD
1. Engage drive wheel shifter handle.
2. Engage blade shifter handle.
3. Standing on the right side of unit, lift handle with left
hand, and lower blade to preset depth with right
hand.
4. Adjust throttle to full speed.
5. Push clutch lever forward and lower handle.
6. After cutting a short distance, stop unit and check
thickness of sod. Adjust if necessary.
7. At end of each cutting pass, lift up on handle to clear
cutting blade from sod, retard throttle and turn Jr.
Sodcutter around for return pass.

STORAGE INSTRUCTIONS

!
WARNING
S To prevent possible explosion or ignition of va-
porized fuel, DO NOT store equipment with fuel
DATE
12
in tank or carburetor in enclosure with open
flame (Example: Furnace or water heater pilot
light).
S Check engine oil level and air filter element daily.
S Check oil level in gear case.
S Close fuel valve at bottom of fuel tank.
S Clean cutting blade (grass, dirt, etc.).
S For extended storage, refer to the service and
parts manual
When transporting unit on trailer or truck, shut fuel valve
"OFF" beneath fuel tank.
NOTES
Daily Storage
NOTICE

Transporting Unit