Safety Instructions; General Guidelines; Configuration; User Manual - Velleman CAMCOLD17 Manual Del Usuario

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its
lifecycle could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a
specialized company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing the Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

Keep the device away from children and unauthorized users.
Risk of electric shock when opening the cover.
No user-serviceable parts inside. Refer to an authorized dealer for service and/or spare
parts.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
•
Protect this device from shocks and abuse. Avoid brute force when operating the device.
•
Protect the device against extreme heat and dust.
•
Familiarise yourself with the functions of the device before actually using it.
•
All modifications of the device are forbidden for safety reasons.
•
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
• A qualified technician should install and service this device.
• Note that damage caused by user modifications to the device is not covered by the warranty.
4. Features
• fashionable design and suitable size for various applications
• aluminium housing
• pan/tilt camera for wall mounting
• remote control via RS-485 Pelco-P and Pelco-D interface
• control of up to 9 devices using IR wireless control kit (not incl.)
• auto scan function
• waterproof
• vandal proof

5. Configuration

Refer to the illustrations on page 2 of this manual.
• Before installing the pan/tilt dome, it must be configured through the dipswitches that are located
inside the dome. Open the dome by placing it on its back [1]. Rotate the transparent cover counter
clockwise and lift it.
• Remove the plastic cover by pushing on the opposite tabs and lifting it [2].
15/05/2009
CAMCOLD17

User manual

3
©2008 Velleman Components nv
®