Audio-Technica ATH-SR5BT Manual De Usuario página 7

Connect
1 Set your NFC-compatible device so that the NFC function can be used.*
* Refer to the user manual of your NFC-compatible device.
2 Slide the power/pairing switch of the product to the "ON"
position.
3 Touch your NFC-compatible device on the part just above
N-Mark on the product as shown in the figure and complete the
connection from your device.*
* Refer to the user manual of your NFC-compatible device for
the designated location to be touched on your device or how
to complete the connection from your device.
Disconnect
Touch your NFC-compatible device to the part just above the N-Mark on the product again to disconnect
the product from your device.
Switch the device
• If the product is connected to a Bluetooth device and is then touched by an NFC-compatible device, the
connection will switch to this NFC device.
• If you have an NFC-compatible device connected with the product and touch that device to another NFC-
compatible device with Bluetooth wireless technology, the first NFC-compatible device will disconnect
from the product and connect with the second NFC-compatible device.
About indicator lamp display
The indicator lamp of the product displays the following operating statuses by flashing or turning on.
Operating status
Pairing Searching for device
Waiting to be connected
Connection
Connecting
Remaining
Remaining battery level low
battery level
Charging
Charge
Complete
Indicator lamp display patterns
● ● ● ● ● ● ● ● ● ●
● − − − − − − − − − ● − − − − . . .
● − − − − − − − − −
− − − − − − . . .
. . .
. . .
How to connect
L
● Red
. . .
● ● ● ● ●
Flashing
− − − − . . .
●
Lit
English
●
Blue
7