Locations And Function Of Parts And Controls; Front - Sony TU-2041U Manual De Instrucciones

Location and Func tion of Par ts and Controls

Front

1 Program indicator
Indicates the selected channel number.
2 Remote Control sensor
3 AFT indicator
Usually this indicator lights. When you do fine tuning
manually it goes off.
4 MTS/STEREO indicator
The indicator lights in four modes as follows:
Green : The tuner is receiving main sound when the
broadcast is not in stereo, and is ready to
receive stereo sound.
Amber : The tuner is receiving stereo (main) sound.
Off : If the indicator goes off, the tuner is receiving
monaural (main) sound.
Red : The tuner is receiving the Second Audio
Programs (SAP) broadcast.
Note
When the indicator is green or amber, the reception
mode automatically switches according to the broadcast.
5 CATV indicator
When CATV is selected, the indicator lights up.
6 POWER indicator
When the tuner is turned on, the indicator lights up. The
POWER indicator also functions as the battery indicator.
When the internal battery becomes weak, the indicator
flashes.
7 MEMORY button
Use this button to add or erase a channel in the channel
scan memory.
4
CATV 1 2
POWER
MTS 4 5
CATV
FINE 7 8
MTS /
STEREO
MEMORY 0
ENTER
AFT
8 FINE button
Press this button for a few seconds to adjust the fine
tuning.
9 CATV button
Use this button to select the CATV.
!... MTS button
Press this button to switch the reception modes of the
tuner. Each time you press this button, the reception
mode switches in order of main, monaural, SAP, and
back to main.
When the tuner is in the stereo mode, press this button
to switch between stereo and monaural.
Main mode refers to monaural main sound when the
broadcast is not in stereo, or stereo sound when the
broadcast is in stereo.
!` 0-9 buttons
Use these buttons to select a channel.
!" ENTER button
Press this button to tune in the selected channel.
To select channel 14, for example, press 1n 4n ENTER.
!£ CHANNEL +/–,
MEMORY ADD/ERASE buttons
Use these buttons to scan channels, to add/erase
channels in the channel scan memory, or to adjust the
fine tuning.
!¢ POWER switch
Depress to turn the tuner on.
3
CHANNEL POWER POWER
6
ADD
9
MEMORY
ERASE ON
OFF