Flagging Test Results - Roche ACCU‑CHEK Compact Plus Manual Del Usuario

Flagging Test Results

If you wish, you can "flag" your test result with an asterisk
flag an event such as an after-meal (post prandial), exercise, or alternate site test result. When you review
your results in memory, this "flag" can help you remember what was different about the result.
Here is how to flag a result:
1. Perform a test.
2. With the test result on the display, and the test strip STILL IN THE
METER, press and release
result.
3. Hold the meter so the test strip points downward. Slide and release
to turn off the meter and release the test strip.
4. Discard the used test strip.
NOTE
If you wish to remove
once. The appears below the test
S S
again, press and release
to mark a special result. You might want to
twice.
S S
67
Flag