ViewSonic IFP9850-3 Guia Del Usuario página 86

POWER Lock 1. Lock "POWER" key on the front and RCU.
2. The SET_POWER on/off should be workable via RS232, but
3. Can not be unlocked by reset in OSD setting
4. Will auto AC power-on in power-lock
5. Under power-lock, the set will not enter power saving when
Remote control Lock the RCU keys, but keep the front panel buttons workable.
disable
2. Wake-on-LAN by MAC address as alternative for SET Power on
Length= 126 Bytes
6 Bytes 6 Bytes (#1)
0xFF FF ... FF MAC address
does not mean the POWER lock will be released under this
case.
no PC signal and neither not turn off when no other video
signals after 15min.
6 Bytes (#2)
MAC address
78
... 6 Bytes (#16)
... MAC address
24 Bytes
0x00 00 ... 00