Speedlink Medusa Instrucciones De Manejo página 9

Introduction
Thank you for purchasing the Medusa 5.1 USB Surround Headset. With this surround headset,
you experience surround effects as if you were in the cinema! Experience explosions behind you
as if you were in the midst of the action!
Supplied with the product
Medusa 5.1 USB Surround Headset
Driver CD
User manual
Product features
Padded head band
High-quality microphone
Height-adjustable head band
Folding, cushioned ear pads of velvety material
Remote control integrated in cable (Volume/Mute Mic/On/Off)
System requirements
USB port
Windows® 98SE/Me/2000/XP
CD-ROM drive
Minimum 64 MB RAM
Minimum 50MB free hard disk space
Note: The headset is only suitable for connecting to the PC!
Setting up
Note: the headset must be connected before performing the driver installation.
Allocate a permanent USB port to the headset. If, after driver installation, you use a different USB
port for the headset, the system may not detect the headset.
Connect the headset directly to the USB port of your PC and switch on the headset using the
switch on the cable remote control. Wait until your PC has detected the new USB device.
Insert the supplied CD in the CD-ROM drive.
If the installation program doesn't start automatically, click on "Start/Run/Browse" and select
your CD-ROM drive.
Double click on the file "setup.exe" and follow the instructions on the screen.
You can activate or deactivate the checkbox that defines whether you wish to install the driver
only or the demo program as well. Click on "Next" to start installation.
When installation has finished, restart the PC.
9
GB