Components 1 and 2
• These components can be rinsed off under running
water. If need be, clean the components in warm soapy
water using a soft brush.
• Allow the components to dry before you reassemble the
appliance.
Floor Nozzle
1. Press the unlock button (15) to pull the floor nozzle off
the appliance holder.
2. Turn the floor nozzle around, so that you see the lower
side. Remove the cover
down.
3. Pull out the brush roller.
4. Remove threads and hair wound to the brush. Use
scissors, if required.
5. Assembly:
5.1 Place the brush roller, with the triangular recess
first, onto the right side. Make sure that the triangu-
lar recess on the brush roller is positioned correctly.
5.2 Return the bearing of the brush roller into the hous-
ing of the floor nozzle.
6. Place the cover
back on. The latch must audibly
engage.
Storage
• Clean the appliance as described and allow it to dry.
• You may use the mounted charging station for storage.
• We recommend that you keep the appliance in the origi-
nal packaging if it will not be used for long periods.
• Always store the appliance out of the reach of children in
a dry, well ventilated place.
Troubleshooting
Problem
Possible Cause
The
The rechargeable
appliance
battery is empty.
does not
function.
Weak
The rechargeable
suction
battery is nearly
power.
discharged.
The filters are
dirty.
Noise
A foreign body
during
has been sucked
operation.
into the floor
nozzle.
40
PC-BS3035A_IM
by pressing the latch
Remedy
Charge the battery.
Charge the battery.
Clean the filters as de-
scribed under "Cleaning".
CAUTION:
Restart operation only
with dry filters.
Remove the foreign
body. If required, sepa-
rate the floor nozzle from
the appliance holder.
Technical Data
Model:.............................................................. PC-BS 3035 A
Net weight: ....................................................... approx. 2.8 kg
Power adapter
Protection class: ..............................................................
Input:......................AC 100 - 240 V, 50 / 60 Hz, 0.35 A MAX
Output: .....................................................DC 18 V, 500 mA
Polarity:..................................................................
Battery: ......................................... 4 × 3.7 V, 2200 mAh Li-Ion
Operating time: ................................ 20 minutes maximum
Charging time: .....................................................4.5 hours
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibil-
ity and low voltage directives, and has been constructed in
accordance with the latest regulations.
Disposal
Accumulator / Battery Disposal
The appliance contains a rechargeable battery.
Used batteries / accumulators (rechargeable
batteries) do not belong in household waste.
The battery must be removed before the prod-
uct is recycled. Contact qualified personnel.
Information, where batteries / accumulators are to be
disposed of can be obtained from your local or municipal
authorities.
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
This helps avoid the potential effects of incorrect disposal
on the environment and human health.
This will contribute to the recycling and other forms of re-uti-
lisation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.
18.04.19