Operation; Cleaning And Care; Descaling - Unold 8125 Instrucciones De Uso

Ocultar thumbs Ver también para 8125:
Tabla de contenido

Publicidad

OPERATION

1.
Remove the kettle from the base.
2.
Open the lid.
3.
Fill the kettle with at least 0.5
liters of water. Do not fill the kettle
with more than 1.0 liters of water
("Max" marking).
4.
Close the lid by pressing lightly.
5.
Place the kettle level on the base.
6.
Switch on the kettle by pressing
the ON/OFF switch downwards
into the „I"-position. The kettle
cannot be switched on if it is not
properly seated on the base.
7.
When the water boils, the appli-
ance automatically shuts off.
8.
Whenever you take the kettle off
the base, the appliance is auto-
matically switched off, even if the
water is not yet boiling.
9.
Of course you may also push the
switch into the „O"-position to
interrupt heating.

CLEANING AND CARE

Allow the appliance to cool
before cleaning it.
Before cleaning, always turn
off the appliance and unplug it
from the power supply.
1.
Do not immerse the base, power
cord or kettle in water or other
liquids or wash them in the dish-
washer.

DESCALING

1.
To keep the appliance operating
efficiently and to prolong its ser-
vice life, it should be descaled
regularly, depending on the hard-
ness of your water.
2.
The lime scale filter has to be
cleaned regularly. Please empty
the kettle completely and allow it
to cool off. Carefully remove the
16
10. If you want to boil more water, ple-
ase allow the appliance to cool off
for a few minutes.
Boiling water can cause scal-
ding. Therefore, please handle
the appliance with care when
it contains hot water.
11. The appliance features boil dry
protection. When operated wit-
hout water or with excessive sca-
ling, the appliance shuts off auto-
matically. If this happens, please
allow the appliance to cool off
briefly before filling it with water
again or descale the appliance as
described in the chapter "Desca-
ling".
2.
Wipe off the base and the kettle
with a damp cloth and a little
dishwashing detergent. Do not use
any abrasive scouring agents, steel
wool, metal objects, hot cleaning
agents or disinfectants, since they
can damage the appliance.
3.
The appliance must be completely
dry on the outside before you use
it again.
filter from the pour spout. Clean
the filter carefully with a soft
brush under running water. You
can also place the filter in a bowl
with a descaling solution. Then
rinse the filter with clear water
and insert it in the pour spout.
3.
Use off-the-shelf descaling pro-
ducts for electronic kettles and

Publicidad

Tabla de contenido
loading

Tabla de contenido