Bosch GFZ 14-35 A Instrucciones De Servicio página 9

Product Specifications
Power Hand Saw
Order number
Rated power consumption
Stroke rate
Stroke
Blade length
Weight (without accessories) approx.
Protection class
GFZ 14-35 A:
Switch-on actions cause brief drops in the mains voltage. For unfavourable mains conditions, interference with
other equipment can occur.
For mains impedance of less than 0.36 Ω , no interference can be expected.
Noise/Vibration Information
Measured values determined according to EN 50 144.
The A-weighted noise levels of the tool are typically:
Sound pressure level: 91 dB(A)
Sound power level: 104 dB(A)
Wear ear protection!
The typical weighted acceleration is 4,0 m/s
Product Elements
1 Sword
2 Loop handle
3 Stroke rate regulator (GFZ 16-35 AC)
4 Switch-on lock
5 On-off switch
6 Channel for dust extraction
7 SDS release button
8 Catch for the dust extractor
9 Saw blade protector
10 Saw blades
11 Saw blade guide
12 Knurled nut for adjusting the inclination of the loop
handle
13 Knurled screw for the sideways sliding of the loop
handle
Not all the accessories illustrated or described are in-
cluded in standard delivery.
3 609 929 347 • (00.12) T
GFZ 14-35 A
0 601 637 0..
[W] 1400
[RPM] 2600
[mm] 50
[mm] 350
[kg] 5.2
/ II
Intended Use
The machine is intended for the free-hand sawing of
wood, plastic and light building materials. It is suitable
for straight and plunge cuts. The saw blade recom-
mendations are to be observed.
2
.
Accessories
Saw blade set for wood . . . . . . . . . . 2 608 632 120
Saw blade set for light building
material, hard metal inserts . . . . . . . . 2 608 632 123
In addition, the general safety instructions in the
enclosed booklet must be followed.
Before using for the first time, ask for a practical
demonstration.
English–1
GFZ 16-35 AC
0 601 637 7..
1600
850 ... 2600
50
350
5.2
/ II
For Your Safety
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed.
If the cable is damaged or cut through
while working, do not touch the cable
but immediately pull the mains plug.
Never use the machine with a dam-
aged cable.
Wear ear protection to prevent damage
to your hearing.
Wear safety glasses, protective gloves
and sturdy shoes.