Pulsar N450 Manual De Usuario página 16

Tab 1
Zeroing profile
This main menu option allows you to select between one of the three profiles.
Each profile includes the following:
•
Set of distances with zeroing coordinates for each.
•
Reticle color
•
Reticle type
Various profiles can be used when employing the riflescope on different rifles and
when shooting different cartridges.
•
Hold down the M (9) button to enter the main menu.
•
Select submenu with UP (8) and DOWN (10) buttons.
•
Press briefly the M button to enter the submenu.
•
Select one of the zeroing profiles (shown with letters A; B; C; D; E) with the UP/
DOWN buttons.
•
Confirm you selection with a brief press of the M button.
•
The name of a selected profile is displayed in the status bar.
Graphics brightness
•
Hold down the M (9) button to enter the main menu.
•
Select option
•
Press briefly the M (9) button to enter menu item.
•
Press briefly the UP (10) and DOWN (8) buttons to set the desired
brightness level (of the menu and status bar icons) from 1 to 10.
•
Press briefly the M (9) button to confirm.
Reticle setup
This main menu option allows you to select reticle shape, color and brightness.
Reticle type
•
Hold down the M (9) button to enter the main menu.
•
Select submenu with UP (8) and DOWN (10) buttons.
•
Press briefly the M button to enter menu item "Reticle type".
•
Select the desired reticle shape out of the list of reticles with UP/DOWN
buttons.
•
The reticle type changes as the cursor goes down the reticle list.
•
Confirm you selection with a brief press of the M button.
•
Full reticle catalogue is available online: www.pulsar-vi.com
Reticle color
•
Hold down the M (9) button to enter the main menu.
•
Select menu item "Reticle color" with UP (8) and DOWN (10) buttons.
•
Press briefly the M button to confirm.
•
Select the desired reticle color with UP and DOWN buttons:
- black/red (black reticle, red cross)
- white/red (white reticle, red cross)
14
with UP (10) and DOWN (8) buttons.