Level 3: Free Programming Of The Counting Keys; Counting - Marienfeld Cellcounter Manual De Instrucciones

09/2020
b. Other programs
When using the other programs, the countstop has to be selected.
By pressing and holding the "Right / +" or "Left / - / Eval" keys, the countstop will
increment or decrement in steps of ten.
Confirm your selection by pressing the key „Enter/Go On". The display will now
change to level 3.

5.3 Level 3: Free programming of the counting keys

Using the program „Free" you have to select the exclusive keys. By pressing a counting
key which is currently not considered exclusive, it will be marked as exclusive. Pressing an
exclusive key will mark it as non-exclusive. Confirm your selection by pressing the key
"Enter/Go On" and the display changes to the counting phase.
For all other programs, the exclusive keys are set automatically.

6. Counting

After the setup a keyboard is displayed on the TFT color display. It shows which keys are
evaluated exclusively and which key was last pressed. If an exclusive key was pressed, it
is highlighted in the same way like keys which are non-exclusive.
At the top of the color display the relative reading is shown (if the key is a non-exclusive
key) as well as the absolute count of the last key pressed. The exclusive status of a key
can thus be seen because no relative value is displayed.
For every counted cell the corresponding key has to be pressed once. By pressing the
key "Corr./Clear" the last count can be corrected.
Paul Marienfeld GmbH & Co. KG
Am Wöllerspfad 4
97922 Lauda-Königshofen, Germany
Tax number: 8028008501
VAT reg. no.: DE 811 479 105
Phone: +49 (0) 9343 6272-0 Deutsche Bank Würzburg
Fax: +49 (0) 9343 6272-25 IBAN: DE95 7907 0016 0130 0888 00
info@marienfeld-superior.com SWIFT: DEUT DE MM 790
www.marienfeld-superior.com
Commercial Register Mannheim HRA 550306, personally liable
partner: Marienfeld-Verwaltungs-GmbH, 97922 Lauda-Königshofen
Commercial Register Mannheim HRB 560548, Managing Directors:
Gerd Marienfeld, Harry Marienfeld
19