flexo THS 500 Pro Instrucciones De Manejo página 32

Troubleshooting
Problem
Unit does not run
Blade cutter is running hot
Blade cutter will not move
Excessive vibrations/noise
Pole trimmer operates intermittently
We, Ikra GmbH, Schlesierstraße 36, D-64839 Münster/Germany, declare under our sole responsibility that the
product Electric Telescopic Hedge Trimmer THS 500 Pro, to which this declaration relates correspond to the
relevant basic safety and health requirements of Directives 2006/42/EC (Machinery Directive), 2014/30/EU (EMC-
Guideline), 2011/65/EU (RoHS-Guideline) and 2000/14/EC (noise directive) incl. modifications. For the relevant
implementation of the safety and health requirements mentioned in the Directives, the following standards and/or
technical specification(s) have been respected:
EN 60745-2-15:2009+A1:10, EN 60745-1:2009+A11:10, EN ISO 10517:2009+A1:13
EN 55014-1:2006/+A1:2009/+A2:2011
EN 55014-2:1997/+A1:2001/+A2:2008
EN 61000-3-2:2014, EN 61000-3-3:2013, EN 50581:2012
AfPS GS 2014:01 PAK
measured acoustic capacity level
guaranteed acoustic capacity level
Conformity assessment method to annexe V / Directive 2000/14/EC
The year of manufacture is printed on the nameplate and can be additionally retrieved via the consecutive serial number.
Münster, 27.09.2016
Maintenance of technical documentation: Gerhard Knorr, Kärcherstraße 57, DE-64839 Münster
Possible Cause
Power cord not connected
Lock off not fully operated
Blade cutter dull
Blade cutter has dent
Too much friction, due to lack of
lubricant
Machine defective
Machine defective
Internal wiring of machine damaged
On/Off switch defective
EC Declaration of Conformity
95,9 dB (A)
98,0 dB (A)
Gerhard Knorr, Technical Management Ikra GmbH
GB-15
Possible Solution
Check power supply connection
Check that lock off is fully forward
prior to moving trigger
Have blade sharpened
Have blade inspected/ overhauled
Apply lubricant spray
Contact Service Agent
Contact Service Agent
Contact Service Agent
Contact Service Agent