Firmware Upgrading - Sveon SPremiere Serie Manual De Usuario

Delete files: Use the arrow buttons to select the
file you want to delete and press "OSD" button of
the remote control. Select "Delete" option in the fo-
llowing menu. The system will ask you to confirm
if you want to delete the file. Select "Yes" if you
want to delete the file or "No" if you don´t want to
delete it.
Important: Once you have deleted a file you can
not restore it.
Create a folder: Press "OSD" button of the remote
control and select "New folder" option. A virtual
keyboard will appear: use the arrow buttons to
enter the different characters and "Enter" button to
enter each word. Press "Zoom" button of the re-
mote control if you want to modify a character.
Once you have written the new folder name press
"Stop" to save the changes and exit this menu or
press "PSM" to cancel and maintain the old folder
name.
Change output resolution: Press "Video" button several times until select the output resolution.
Copy: This function allows you to copy files between the different external storage devices connected to the unit or between
folders in the same external device. Please note the external storage units must be in FAT32. Follow these steps:
1. Go to "File" option in the Main Menu. "Copy" and "Paste" options are available only in Main Menu.
2. Select the file you want to copy and press "OSD" button of the remote control. Use the arrow buttons to select "Copy"
option.
3. If you want to copy several files at the same
time, select one by one all the files you want to
copy, press "OSD" button and press "Select" but-
ton. When all the files you want to copy are selec-
ted, press "OSD" button and press "Copy".
4. If you want to copy the file in a different storage device, select the file/s you want to copy and press "Copy". Then press
"Exit" button to go to the Main Menu and press it again to go to the first screen (where you can choose the storage device).
Select the storage unit where you want to save the file and press "Paste" button to complete the process.

13. Firmware upgrading

SPM100 allows you to upgrade its firmware version which will allow you to enjoy the last improvements for your device.
The firwmare updates are available in Sveon official webiste www.sveon.com; you can also ask for the updates to our Tech-
nical Assistant department:
email: soporte@sveon.com / Tlf.: +34 902 402 503
Please follow these steps to update the firmware of your device:
1. Copy the updated file in an external USB storage device or in a memory card.
2. Connect the external USB device or the memory card to the SPM100.
3. Go to "File" option in the Main menu and search for the update file. Use the arrow buttons to select the file and press
"Enter" to confirm. Wait while the upgrading process is running.
4. During the firmware upgrading process please do not press any button of the remote control and make sure the unit is
connected to the power outlet. If the unit is disconnected during this process it could be damaged.
5. When the upgrading process is finished the unit will be restarted automatically.
6. Unplug the external storage device from the SPM100 and delete the upgrading file.
If you have any doubt during this process please contact with our Technical Assistant department.
SPM100 User guide
Index
1. Welcome
2. Features
3. Content
4. Hardware
5. Remote Control
6. TV Connections
6.1 AV Connection
6.2 HDMI Connection
7. USB device connection
8. Playback from card reader
9. First time usage
9.1 Starter Screen
10. Main Menu
10.1 Movie
10.2 Music
10.3 Photo
10.4 Slide
10.5 File
11. Setup menu
12. Basic operations
13. Firmware upgrading
14. FAQs
English 20