Tabla de contenido
Publicidad
Trouble Shooting Guide
Symptoms
No power, indicators do not Check that the power plug is correctly plugged into
light up and/or no operation the wall socket. If the machine is still not working,
call for repair.
Document jams
Verify the correct pouch thickness as specified.
Ensure that the document is inserted evenly into
the machine. Follow the instructions in "Jam
Release" section to clear the jam.
Misty laminates
Laminating the same document again will help to
improve the quality.
Document not feeding
Make sure jam release lever is in the UP POSITION.
Specifications
Description:
B00D448IIK/B00D44TLTK
Operating Voltage:
220v ~ 240Hz, 50/60Hz
Current:
1.0A, 250W
Dimensions:
341mm x 127mm x 64mm
Weight:
1.14kgs
Max Laminating Width:
232mm
Pouch Thickness Range:
3mil - 5mil (80-125mic)
Warm-up Time:
(Hot Mode) 3-4 Minutes
Recommended Duty Cycle: 30 min. ON / 30 min. Off after the READY light
lights up
Measures
4
Schema del prodotto
Pouche plastificatrice e ingresso dimensioni
Accensione
e regolazione
spessore
pouchet
Uscita pouche plastificante
Cavo
Leva rilascio pouche
d'alimentazione
Italiano
Indicatore
d'accensione
Indicatore
luce pronto
17
Publicidad
Tabla de contenido
