Cleaning And Maintenance; Technical Specifications - Velleman VDL400SW Manual Del Usuario

4. Installation
• Remove all packaging and clean the spray nose before using.
• Check there is no damage before first use.
• Install the machine in horizontal position. Fill the tank with a high quality snow-liquid and close it tight.
• Make sure you've got the right voltage before connection.
• Insert the remote controller in the 'control input'.
5. Use
• Make sure the power switch is set to "OFF".
• Insert the DC jack of the adaptor into the device and plug the adaptor into the mains outlet.
• Set the power switch to "ON".
• When the tank is filled with the snow-liquid you can push the button on the controller.
• Set the power switch to "OFF" to stop the device.

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections...
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Every 40 hours, you have to clean the machine with clean water to be sure there are no dirty
particles in the reservoir.
9. Change the filter whenever it is necessary.
10. If the snow comes out slowly or stops, cut off the machine at once.
11. Check the fuse is in good condition.
12. Contact your dealer for spare parts if necessary.

7. Technical Specifications

Power Supply
Fuse
Power Consumption
Tank capacity
Snow volume
Snow liquid
Dimensions
Total Weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
18.01.2011
VDL400SW
max. 230VAC / 50Hz
F4A / 250V (order code: FF4N)
max. 400W
1L
800mm³ / min.
order code: VDLSW5
342 x 185 x 190mm
3.2kg
3
Rev. 01
©Velleman nv