Hkoenig GSX10 Manual De Instrucciones página 5

Step 1: Settle down the Bowl on the motor body
a. Put the bowl triangle mark to match the unlock logo on the motor body.
b. Turn the bowl anticlockwise as Pic. A.
c. Sure the triangle mark turn to match the lock logo on the motor body.
Pic. A.
Step 2: Put the Filter into Filter support,
Sure the silicone part is well inserted onto the groove.
Step 3: Put assembled Filter / Filter support into bowl
For easy operation, please set filter edge triangle mark to match the lock logo on the top of bowl.
Step 4: Put down the Pressing screw into Filter.
Rotate the pressing screw is well inserted. The top of pressing screw should be in the same level of
filter.