Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Hardware Installation
Note:
Follow the general instructions for installation of the product. If necessary, read
the manual of your computer, or ask a specialist for help.
1.
Turn off your PC and unplug the power cord.
2.
Open the housing.
3.
Remove the slot holder from the available PCI slot and the rear slot for the
parallel port.
4.
Before you can insert the Card into the PCI slot, please connect the parallel
port of the rear bracket to the PCI card.
5.
Insert the card straight and carefully into the free PCI slot, until it is well
seated.
6.
Use a screw to attach the card to the housing.
7.
Fix the rear bracket with a screw also on the housing.
8.
Reattach the housing, and connect the power cord to the AC adapter.
Driver Installation
1.
Switch on your computer.
2.
Put the driver CD in the CD ROM drive.
3.
Open Windows Explorer, select: CD-drive\Moschip\OS\Setup.exe.
4.
Follow the instructions of the driver installation.
5.
Restart your system after the installation.
6.
After restart you can start using the device immediately.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by which means, electronically or mechanically,
without explicit written approval of Delock.
Edition: 03/2014
-
-
Publicidad
Tabla de contenido
