Description The DeLock PCI card expands your PC by four external serial Ports. You can connect devices like scanner, modem, mouse etc. to the card. Specification • 2 x DB9 serial port • 2 x Pin header, with rear bracket with two DB9 •...
Hardware Installation Note: Follow the general instructions for installation of the card. If necessary, read the manual of your computer, or ask a specialist for help. 1. Turn off your PC, and unplug the power cord. 2. Open the housing. 3.
Página 4
Install serial interface 1. The hardware assistant appears with a newly found serial interface. Choose “No, not this time” and click “Continue”. 2. Choose “Install software automatically” and click “Continue”. 3. Click “Continue installation”. 4. Click “Finish”. 5. When the other serial ports are found, repeat steps 1-4 four times. Your PCI card is installed and ready for use.
Página 5
* A connection fee applies according to fee schedule of Deutsche Telekom AG or your local telephone provider. All callers outside of Germany dial please 00493081789324 You can find current product information on our homepage: www.delock.de Final clause Information and data contained in this manual are subject to change without notice in advance.