2. To re-assemble after cleaning, see below Care and Maintenance,
for instructions
CAUTION: Do not forget place the gasket back in to the bottom
of the blade housing.
3. Always ensure the Blender is placed on a stable flat surface
before operating.
To Use the Blender
CAUTION: Do not operate the product until it is properly
assembled.
1. Ensure the product is unplugged from the electrical outlet.
2. Pour liquid ingredients into the Plastic Jar.
3. Wash all solid ingredients and cut them into pieces small enough
to fit into the Centre Cap hole.
CAUTION: The Plastic Jar has 1.5 Ltr capacity. Do not over-fill it.
CAUTION: Do not use the product for mashing or grinding heavy
foods (e.g., potatoes or meats) or to stir thick mixtures (e.g.,
dough).
4. After filling the Plastic Jar with ingredients, place the Lid on top
and ensure the Centre Cap is securely fitted.
5. Plug the product into a standard 220-240 volt AC electrical
outlet.
6. Press the button required, 0 – Off Switch, 1,2– Low Speed set-
ting, 3, 4– High Speed setting, P - Pulse setting.
CAUTION: Never operate the product empty.
CAUTION: Never operate the product's motor for more than 3
minutes at a time. Allow the motor to cool for 60 seconds after
3 minutes of operation.
MANUAL GUIDE
12
E N