NOTE: If the Blades are not operating smoothly, stop the product
and add some liquid, or reduce the contents in the Plastic Jar
7. Turn off the product by pressing the 0/Off Button, and then
unplug
the
WARNING: Always unplug the product when it is not in use or
when it will be left unattended.
8. When the Blades have stopped, the Plastic Jar can be removed
from the Motor Housing.
Care and Maintenance
WARNING:
Always ensure the product is unplugged from the
electrical outlet before relocating, assembling, disassembling, or
cleaning it.
CAUTION:
Before disassembling the product for cleaning, ensure
the Blades have completely stopped and use caution when
attaching or detaching them, as they are extremely sharp.
Always clean the product immediately after each use. Wash all
parts except the Motor Housing in warm, soapy water and then
rinse and dry thoroughly. Never immerse the Motor Housing in
water or other liquids. Never use abrasive cleaners on any part
of the product. Do not place any parts into a dishwasher or
extremely hot water.
To disassemble the Glass Jar for cleaning, turn the Jar anti-
clockwise and pull out. To unscrew the Blade Base from the
Glass Jar turn the base clockwise and unscrew. Remove the
Gasket from inside the Blade Housing for cleaning. Use a small
brush (not included) to remove particles of food lodged
underneath the Blades. To reassemble, replace the Gasket and
the Blades into the bottom of the Glass Jar, and then turn the
MANUAL GUIDE
product
from
13
the
electrical
E N
outlet.