English - Domo TR20C005-C Instrucciones De Montaje

E N G L I S H
Important information
Your hand transmitter works with a rolling code which
changes with every transmitting action. For this reason, the
hand transmitter must be programmed on each receiver to
be activated using the desired hand transmitter button (see
receiver instructions).
ATTENTION!
• Only operate the door when its range of travel is
within your field of vision.
• Ensure that neither persons nor objects are
located within the door's range of travel.
• Keep hand transmitters well out of the reach of
children!
• Wait until the door has come to a complete halt
before entering the door's range of travel.
• Before driving in or out of the garage, make sure
that the door has opened fully.
• Protect the hand transmitter from damp, dust and
exposure to direct sunlight. Non-compliance could
impair the function.
Each time the button on the hand transmitter is pressed,
O
the LED a emits a signal. If the LED lights up, the trans-
mitter is operating.
TR20C005-C RE / 07.2009 11