Changing Oil; Service Information - Bostitch BTFP02006 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ChAnGinG oil

note: Pump oil contains substances that are regulated
and must be disposed of in accordance with local, state and
federal laws and regulations.
Hot surfaces. Risk of burn. Aftercooler, pump
head, and surrounding parts are very hot, do not touch (see
the Hot Surfaces identified in Fig. 2). Allow compressor to
cool prior to servicing.
1. Ensure On/Off switch is in the OFF position.
2. Allow the unit to cool.
3. Remove air compressor plug from outlet.
4. Drain air tank.
5. Locate a suitable container under pump drain plug (K).
6. Remove the dipstick (J) from crank case.
7. Remove the oil drain plug (K).
8. Allow ample time for all oil to drain out. (Tilting the compressor towards the drain plug
will assist in draining.)
9. Install the oil drain plug.
10. Fill pump with ISO 100/SAE40, non­detergent, premium air compressor oil.
11. Replace dipstick.
ACCESSORIES
The use of any other accessory not recommended for use with this tool
could be hazardous. Use only accessories rated equal to or higher than the rating of the air
compressor.
Recommended accessories for use with your tool are available for purchase from your local
dealer or authorized service center. If you need assistance in locating any accessory for your
tool, please contact Bostitch Fastening Systems 701 E. Joppa Road Towson, Maryland 21286,call
1­800­556­6696.

SERVICE INFORMATION

Please have the following information available for all service calls:
Model Number _____________________ Serial Number _______________________________
Date and Place of Purchase ____________________________________________________
REPAIRS
To assure product SAFETY and RElIABIlITY, repairs, maintenance and adjustment should be
performed by a BOSTITCH factory service center, a BOSTITCH authorized service center or
other qualified service personnel. Always use identical replacement parts.
FUll ONE YEAR WARRANTY
BOSTITCH heavy duty industrial tools are warranted for one year from date of purchase. We will
repair, without charge, any defects due to faulty materials or workmanship. For warranty repair
information, call 1­800­556­6696. This warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others. This warranty gives you specific legal
rights and you may have other rights which vary in certain states or provinces.
lAtin AmeriCA: This warranty does not apply to products sold in Latin America. For products
sold in Latin America, see country specific warranty information contained either in the
packaging, call the local company or see website for warranty information.
free wArninG lABel replACement (fiG. 4): If your warning labels become illegible or are
missing, call 1­800­556­6696 for a free replacement.
L
J
K
17

Publicidad

Tabla de contenido
loading

Tabla de contenido