Before Using For The First Time; Care, Maintenance And Disposal; Ec Declaration Of Conformity - Ergomix 1000 Instrucciones De Uso

Before using for the first time

Secure the safety handle firmly using the screws provided (figure). The safety handle not only protects the
machine it also allows excellent control of the machine during the mixing opteration. Moreover, the safety
handle is designed to make storage and pick-up easier. Do not operate the machine without the safety
handle.
Screw the mixer tool with the M 14 external thread into the mixer spindle (24 mm and 17 mm open end
wrench, if necessary). Be careful by using a different paddle dimension or shape as recommended a
damage to the machine may cause.
Connect the machine cable into the supply outlet, making sure that the power supply is 220/230 volt.
Start - up
To pick up the machine, always use the grip handle first.
The machine is started up by the ON/OFF switch. When this switch is released, the
machine will come to a stop. Always hold the machine firmly by gripping both grip
handles.
Increasing the pressure on the ON/OFF-switch, increases the tool rotation in the present
range. When mixing liquids, we recommend to start in the lower rpm range, to prevent
"splashing". Use the low rpm only at start and stop, to prevent possible overload of the motor.

Care, maintenance and disposal

Keep the machine and mixer tool clean.
The machine's internal components must be kept free of foreign bodies. When using the
machine always check, that the ventilation slots are not covered.
Special maintenance of the machine is not required, however wear parts (f.i. carbon brushes)
should be checked occassionally. Maintenance or repairs must be carried out only by authorized repair
shops.
Use original spare parts only
The machine, accessories and packaging should be properly recycled and never disposed of with
household waste. All devices which are no longer suitable for use can be taken for recycling to the
nearest depot for electrical scrap or returned to the manufacturer delivery free.
Warranty
The manufacturer's guarantee, is valid for 24 months from the date of purchase. Should claims be
made under guarantee, please enclose the invoice or delivery note.
Repairs carried out by a third party release UNIMIX from any obligation with respect to the guarantee.
In the event of malfunctions, please return the machine to us.
Damage deriving from normal wear and tear, overloading or improper use of the machine, is not cov-
ered by the guarantee.
EC - Declaration of conformity
We declare under our sole responsibility that this product is in conformity with the following standards
of standardization documents. EN 55014-1:2006 +A1 +A2; EN 55014-2:1997 +A1 +A2;
EN 61000-3-2:2006 +A1 +A2, EN 61000-3-3:2008, EN 60745-1:2009+A11 in accordance with the
regulations 2004/108/EEC, 2006/42 EEC.
Alexander Essing
Ergomix_10Sprachen_Rev2 2012.indd 6
Technical documentation can be requested from:
Collomix Rühr- und Mischgeräte GmbH
Abt. Technische Entwicklung
Daimlerstr. 9, 85080 Gaimersheim, Germany
05.09.2012 10:40:25