DMG PermaCem Manual Instrucciones De Uso página 13

Using the Automix cartridge
D
E
F
Insert cartridge
1. Push up the lever [A] at the back of the
Automix-Dispenser and pull back the slide
[B] completely.
2. Lift up the plastic lever [C], insert the car-
tridge and lock it using the plastic lever [C].
Note: Make sure that the notches on the car-
tridge line up
Automix-Dispenser.
14
C
A
with those on
Attach mixing tip
1. Remove the cartridge cap [D] or used mix-
ing tip by turning it 90° counterclockwise,
and discard it.
2. Attach a new mixing tip [E].
B
Note: In order to attain an optimum mixing
result, DMG recommends the use of the mix-
ing tips available from DMG. All mixing tips are
also available as refill packs.
Note: Make sure that the notches on the mix-
ing tip line up with those on the cartridge.
3. Turn the mixing tip clockwise 90° to lock it.
Applying the material
When using a cartridge for the first time,
squeeze out a pea-sized amount of material
and discard it.
The material is mixed in the mixing tip by
pulling
the
Automix-Dispenser and it is then applied
directly.
the trigger [F] of the