General Information; Transport And Storage; Safety Instructions - Tecsis TM1 Serie Manual De Instrucciones

1. General information ... 3. Safety instructions

1. General information

Please read these operating instructions before commissioning
the thermometer.
These operating instructions contain information on mounting, commissioning
GB
and maintenance. Besides these operating instructions you should also observe
existing standards, supplementary technical data and, if necessary, additional
certificates.
Designated use: The bimetal thermometers are used mostly in the heating,
ventilation and air-conditioning to monitor the temperature of the process.

2. Transport and storage

The thermometers must be kept dry and clean during storage and transportati-
on. Avoid shocks and vibrations. Protect the thermometers from direct sunlight,
dust, insects, humidity and other aggressive atmospheres. The packaging
material is transparent in order to prevent any enclosed accessories getting
lost.
Permissible storage temperature: -20 ... +60 °C

3. Safety instructions

The appropriate national safety regulations (i.e. EN 60079-14 /
837-2) must be observed when installing, commissioning and
operating these devices.
■
Serious injury and/or damage can occur if the appropriate regulations are
not observed.
■
Only appropriately qualified personnel should work on these instruments.
10 tecsis operating instructions bimetal thermometers TM2xx-TM3xx