Handling And Operation; Remote Control - Silvercrest KH 2376 Instrucciones De Uso

Remote control

GB
Inserting the battery
Using the remote control

Handling and operation

58
Remove the supplied battery from the packing.
To insert the battery and/or change the battery proceed
as follows:
Pull the battery compartment out of the remote control
by pressing the lateral locking device and at the same
time pull the battery compartment out.
Remove the depleted battery and insert a new battery
of the type CR2025 (Button cell) into the battery com-
partment. Be sure to insert the battery with the correct
polarity.
Slide the battery compartment back into the remote
control.
Point the remote control to the Infrared sensor
device.
NOTICE
► You can use the remote control up to a distance of 8 m from the device.
In this chapter you receive important information for the handling and operation
of the device.
NOTICE
► Most of the functions can be operated by the buttons on the device as well
as by the buttons on the remote control. In these instructions operation via
the buttons on the device is described. Any reference to the pushbuttons on
the remote control will be specifi cally highlighted.
► If no setting is made and/or no button pushed within approx. 5 seconds the
device returns to its previous operating mode. Changed settings are saved.
Handling and operation
23
Bluetooth Car Radio KH 2376
on the front panel of the