Extel O’MOUV Instrucciones De Uso página 80

FTP Settings: The FTP (File Transfer Proto-
col) allows you to make a remote storage
area located on an FTP server accessible to
an FTP client (in this way you can access the
hard disk of a remote computer on your
network or via the Internet). Your IP camera
can connect to an FTP server and save image
captures on it (regular backup or if an alarm
is triggered). This section will allow your
camera to know the information required to
access the desired server.
Email settings
SD card settings
GB15
FTP Server: Enter the IP address or domain name of the FTP
server.
FTP Port: Enter the FTP server port (by default port 21).
FTP User: Enter the name required for identifi cation.
FTP password: Enter the password required for identifi cation.
FTP loading interval: Select the time interval between each
sent image (1-3600s)
Sender: E-mail address of the sender.
SMTP server: SMTP message server.
SMTP Port: SMTP port of the sender used to connect
to the desired STMP server (by default most servers
use port 25).
SSL: Depending on your SMTP server, by default none.
Recipient: E-mail address of the recipient.
CFI EXTEL O'MOUV - 10/2015