Sandri Garden GBL 26 Manual De Instrucciones página 18

GB
9.MAINTENANCE
SPARK PLUG
At least once a year or if the engine has problems
starting up properly, check the condition of the spark
plug. Wait for the engine to cool before operation.
1) Remove the cap and unscrew the spark plug
with the wrench provided (fig. 54).
If the electrodes are excessively soiled or are very
worn, replace the spark plug with an equivalent
(fig. 55-56).
Excessive soiling may be due to:
# The oil ratio used in fuel is too high and/or oil is not
of an appropriate type.
# Air filter is partly clogged.
2) Screw the spark plug manually as far as possible
to avoid damaging its socket. Use the wrench
provided only to tighten it (fig. 54).
AIR FILTER
Clean the air filter periodically or frequently when
working in dusty areas.
1) Unscrew the wing nut from the cover (fig.57).
2) Wash with water and neutral detergent.
3) Dry the filter before replacing it (fig.58).
Replace the filter if it is damaged so as not
compromise engine life.
FUEL INTAKE FILTER
Replace the filter once a year by removing it with a
hook through tank-refilling outlet.
SILENCER SPARK ARRESTER SCREEN
# A ring with a screen is inserted in the exhaust gas
outlet (outermost part).
# Deposits tend to block the screen and considerably
reduce engine performance.
# Remove the ring with a screen using a pair of
pliers (fig.59).
18/
112
BRUSH CUTTERS OPERATING MANUAL
ENGINE IDLING SPEED
# Before use, always make sure the line
head does not turn when the engine is idling.
# If it tends to turn, contact a service centre for
adjustment.
CHECKING SCREWS AND ROTATING PARTS
# Before use, always make sure there are no screws
or loose parts and there are no cracks or worn
sections in the line head.
# Replace any damaged parts before reuse.
CLEANING, TRANSPORT AND STORAGE
# If the trimmer is not used for over 2 months, empty
the fuel tank.
# Do not clean with aggressive liquids.
# Store the device in a dry and safe place inaccessible
to children.
# For transportation, empty the fuel tank and protect
the blade (if fitted) with a special guard.
TECHNICAL DATA GBL 26