Fitting The Turntable - Silvercrest KH 2431 Instrucciones De Uso

Before the initial use

Fitting the turntable

GB
MT
Setting the tracking pressure
70
♦ Place the belt around the underside of the turntable
♦ Pull the belt outwards.
♦ Place the turntable
lies over the belt pulley. Thereby, hold the belt tensioned.
♦ Place the belt around the belt pulley of the drive motor.
♦ Place the turntable mat
♦ Insert the counterweight onto the tone arm until
it clicks into place. Thereby, the adjustment
ring should face forwards.
♦ Remove the protective cover from the stylus.
♦ Release the securing lever
♦ Move the lever to the front position to raise
the tone arm.
♦ Swing the tone arm
IMPORTANT
Potential stylus damage.
The stylus can be damaged.
► Hold the tone arm fi rmly so that the stylus does not touch the turntable.
Setting up and connecting
on the motor shaft so that the recess in the turntable
on the turntable
of the tone arm.
over the turntable .
.
.
KH 2431