Cleaning And Servicing; Technical Specifications; Declaration Of Conformity Ce - stayer MINI COM 12V Manual De Instrucciones

5. Maintenance and servicing instruction

5.1 Cleaning and servicing

To clean the tool, only use a damp cloth. Never allow
water penetrating into the tool, and do not immerse
any of its parts into a liquid, making sure that you have
disconnected the plug from the electrical power point.
5.2 Servizio de Riparazione
The customer service will provide you with advice on your
eventual inquiries regarding repair and maintenance of
your product as well as on spare parts.
You may also obtain Exploded view drawings and
information on the spare parts on the internet under:
info@grupostayer.com
Our team of technical advisors will be happy to advise you
in respect of the acquisition, application and settings of
the products and accessories.
5.3 Guarantee
Guarantee card
Among the documents forming a part of the electric tool,
you will find the guarantee card. You should fill in the
guarantee card completely and, applying the sales slip or
invoice thereto, and deliver it to your retailer in exchange
for the corresponding acknowledgement of receipt.
¡REMARK! If this card were missing, immediately ask
you retailer for it.
The guarantee is limited to manufacturing or machining
failures, and ceases when the parts have been disassembled,
manipulated or repaired out of works.
5.4 Disposal
We recommend subjecting all electric tools, accessories
to a recycling respecting the environment.
For EU countries only:
Do not throw electric tools to the garbage!
According to European Directive 2002/96/EC
on electric and electronic devices, after
transposition thereof into national law, electric
tools must be collected separately so as to be
subject to ecologic recycling.
Right to change reserved.
6. Regulatory Marking

6.1 Technical specifications

= nominal power
= voltage
V
1
ENGLISH
15
= nominal pressure
Bar
= flow rate
= protection class
= weight
kg
Pay attention to the article number on the feature plate of
your device.
Information on noise and vibration
Noise determined according to EN 60745.
The typical sound pressure level as determined with an A
filter, amounts to: Sound pressure level 88 dB(A); acoustic
power level 99 dB(A). Tolerance K=3 dB.
Wear ear protectors!!
Livello totale di vibrazioni
direzioni) determinato secondo EN 60745: levigatura di
parete di gesso ah = 4 m/s2, K = 1,5 m/s2.
Total level of vibrations (vector sum of three directions)
determined according to EN 60745: Plaster wall sanding
ah=4 m/s2; K=1.5 m/s2.
The level of vibrations stated in these instructions has been
determined according to regulation EN 60745, and may
serve as a basis for comparison with other electric tools.
The level of vibrations as stated has been determined for
the main applications of the electric tool. Therefore, the
level of
vibrations may be different where the electric tool is used
for other applications with different implements, or where
maintenance thereof were deficient. This may result in
a drastic increase in vibration stress during the whole
working period.
So as to determine exactly the stress suffered by vibrations,
it is necessary to consider as well those periods where the
apparatus is disconnected or also it is working but without
being used really. This may result in a drastic reduction
of the stress by vibrations during the whole working
period. Establish additional safety measures to protect
the user against the effects of vibrations, as for example:
Maintenance of the electric tools and of the implements,
keeping hands warm, organization of the work sequences.

6.2 Declaration of conformity CE

The undersigned: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 91 691 86 30 / Fax: +34 91 691 86 31
15
(somma vettoriale di tre