4. Click on "Finish".
.
5. Select "Yes" to allow the installation of the
DNIe Root Authorization (AC RAIZ DNIE) in
your navigator. Thanks to this installation, the
certification could be properly done.
6. Click on "Ok".
7. Click on "Java Runtime Enviroment" and wait
until the installation is finished.
The CD Driver provided includes a digital user guide in PDF format for further information of the unit. Select "User Manual"
to open it. If you haven´t Adobe Acrobat Reader software installed in your PC, click on "Adobe Acrobat Reader" to install
it.
Verification of installation
If you want to verify that the installation process has been completed properly, you can access to any of the available ser-
vices you can find in http://www.dnielectronico.es/servicios_disponibles/.
You can also verify the installation in a manual mode, following the next steps (depending on the navigator softwares ins-
talled in your PC).
1. Internet Explorer
Step 1. Insert the DNIe in its slot and then go to "Tools" menu
/ Internet Options / Content / Certificates.
Step 2. If the CSP module is co-
rrectly installed (Certification Ser-
vice Provider), the DNIe PIN will
be required.
Step 3. Once you write the correct PIN of your DNIe, you will be able to see your certificates in "Personal" section, and
"Certification entities":
- Certificate of Authentication
- Certificate of signature
Step 4. In the tab "Trusted Root Certification Authorities" you can view the root certificate of AC RAIZ DNIe.
Step 5. If you have sucessfully completed the previous steps and you can view your certificates, it means that the CSP
module and the Microsoft root certificate are properly installed.
SCT018 User guide
Index
1. Welcome
2. Features
3. Technical Specifications
4. System Requirements
5. Content
6. Hardware
7. Installation
7.1 Driver installation for Smart Card Reader
7.2 Driver installation for multimedia hot keys
7.3 DNIe software installation
8. Multimedia Hot Keys
9. Keyboard
9.1 Keys
9.2 Special keys usage
9.3 Number keys
10. FAQs